Tel: USA: 1-800-886-7379
Tel: China: +86-21-63757266
Email:
contact@csmmg.com
Home » Material Selection
You may give us specs in ASTM, ANSI, SAE, DIN, BS.
We have listed common materials below for your reference.
Jump to: Cast Iron, Cast Steel, Stainless Steel, Aluminum, Copper, Zinc
Cast Iron Material Table
| Chinese GB | German DIN | British BS | French NF | Sweden SS | USA ASTM | |
| Grey Iron | - | - | - | - | 01 00 | No20B |
| - | GG10 | - | Ft10D | 01 10 | No25B | |
| HT150 | GG15 | Grade150 | Ft15D | 01 15 | No30B | |
| HT200 | GG20 | Grade220 | Ft20D | 01 20 | No35B | |
| HT250 | GG25 | - | Ft25D | 01 25 | No40B | |
| HT300 | GG30 | Grade300 | Ft30D | 01 30 | No45B | |
| HT350 | GG35 | Grade350 | Ft35D | 01 35 | No50B | |
| HT400 | GG40 | Grade400 | Ft40D | 01 40 | No55B | |
| Alloy Grey Iron | - | GGL-NiCr202 | L-NiCr202 | L-NC202 | 05 23 | |
| Ductile cast iron | QT400-18 | GGG40 | SNG420/12 | FCS400-12 | 07 17-02 | 60-40-18 |
| - | GGG40.3 | SNG370/17 | FCS370-17 | 07 17-12 | - | |
| - | GGG35.3 | - | - | 07 17-15 | - | |
| QT500-7 | GGG50 | SNG500/7 | FCS500-7 | 07 27-02 | 80-55-06 | |
| QT600-3 | GGG60 | SNG600/3 | FCS600-3 | 07 32-03 | - | |
| QT700-18 | GGG70 | SNG700/2 | FCS700-2 | 07 37-01 | 100-70-03 | |
| Alloy Cast Iron | - | GGG NiMn137 | L-NiMn137 | L-NM137 | 07 72 | - |
| - | GGG NiCr202 | L-NiCr202 | L-NC202 | 07 76 | ||
| Malleable cast iron | - | 56 1/3 | MN31-8 | 08 14 | 100-70-03 | |
| KTH300-06 | GTS-35 | B340/12 | MN35-10 | 08 15 | 32510 | |
| KTZ450-06 | GTS-45 | P440/7 | - | 08 52 | 40010 | |
| KTZ50-4 | GTS-55 | P510/4 | MN35-10 | 08 54 | 50005 | |
| KTZ60-3 | GTS-65 | B570/12 | MP60-3 | 08 58 | 70003 | |
| KTZ70-2 | GTS-70 | B690/ | IP70-2 | 08 62 |
Carbon Steel Casting and Alloy Steel Casting Material
| Chinese | Japan | USA | Germany | France | UK | （ISO） | ||
| (GB) | (JIS) | ASTM | UNS | DIN | W-Nr. | (NF) | (BS) | |
| ZG200-400 | SC360 | — | J01700 | GS-38 | 1.0416 | E20-40M | AW1,CLA9 | 200-400 |
| GS-CK16 | 1.1142 | |||||||
| ZG230-450 | SC410 | LC8 | J03003 | GS-52 | 1.0551 | E23-45M | CLA1Gr.B | 230-450 |
| GS-CK25 | 1.1155 | |||||||
| ZG270-500 | SC480 | — | J04000 | GS-60 | 1.0553 | — | A2 | 270-480 |
| GS-62 | 1.0555 | |||||||
| ZG310-570 | SCC5 | 80-40 | J05002 | GS-70 | 1.0554 | — | A3 | 340-550 |
| GS-CK45 | 1.1191 | AW2 | ||||||
| ZG340-640 | — | — | J05000 | — | — | — | — | — |
| ZG40Mn | SCMn3 | — | — | GS-40Mn5 | 1.1168 | — | AW3 | — |
| ZG40Cr | — | — | — | — | — | — | — | — |
| ZG20SiMn | SCW480 | LCC | J02505 | GS-20Mn5 | 1.112 | FB-M | — | — |
| ZG35CrMn | SCSiMn2 | — | — | GS-37MnSi5 | 1.5122 | — | — | — |
| ZG35CrMo | SCCrM3 | — | J13048 | GS-34CrMo4 | 1.722 | — | — | — |
| ZG35CrMnSi | SCMnCr3 | — | — | — | — | — | — | — |
| — | SCMn2 | — | — | GS-30Mn5 | 1.1165 | — | — | — |
| — | SCMn3 | — | — | GS-36Mn5 | 1.1167 | — | — | — |
| SCPH11 | LC1 | J12522 | GS-22Mo4 | 1.5419 | FC1-M | 240,B1 | — | |
| SCPH21 | WC11 | J11872 | GS-17CrMo55 | 1.7357 | — | — | — | |
| SCPH32-CF | WC9 | J21890 | GS-12CrMo9 10 | 1.738 | — | 622,B3 | — | |
| SCPH61 | C5，CP5 | J42045 | GS-12CrMo19 5 | 1.7363 | — | 625,B5 | — | |
| SCPH23 | 9 | J21610 | GS-17CrMoV5 11 | 1.7706 | — | — | — | |
| — | SCPL21 | B2N | J22501 | GS-24Ni8 | 1.5633 | FC2-M | — | — |
| B2Q | J22500 | |||||||
| — | SCPL31 | B3N | J31500 | GS-10Ni14 | 1.5638 | FC3-M | BL2 | — |
| CLA10 | ||||||||
| — | — | B4N | J41501 | GS-10Ni19 | 1.5681 | — | — | — |
| B4Q | ||||||||
| ZGMn13-1 | — | B-4 | J91149 | G-×120Mn13 | 1.3802 | — | BW10 | — |
| B-3 | J91139 | |||||||
| ZGMn13-2 | B-2 | J91129 | G-×120Mn12 | 1.3401 | ||||
| A | J91109 | |||||||
| ZGMn13-3 | SCMnH1 | B-1 | J91119 | — | — | — | — | — |
| SCMnH2 | ||||||||
| ZGMn13-4 | SCMnH3 | |||||||
Stainless Steel Material
| Class | China | USA | Japan | Europe |
| Martensite Stainless | 1Cr13 | 410 | SUS410 | SAF2301 |
| 1Cr17Ni2 | 431 | SUS431 | SAF2321 | |
| 9Cr18 | 440C | SUS440c | ||
| 0Cr17Ni4Cu4Nb | 17-4PH | SUH630 | ||
| 1Cr12Ni3MoWV | XM32 | DIN1.4313 | ||
| 2Cr12MoVNbN | SUH600 | |||
| 2Cr12NiMoWV | SUH616 | |||
| Duplex Stainless | 00Cr18Ni5Mo3Si2 | S31500 | 3RE60 | |
| 00Cr22Ni5Mo3N | S31803 | 329J3L1 | SAF2205 | |
| 00Cr25Ni6Mo2N | 329J1L1R-4 | |||
| 00Cr25Ni7Mo3N | S31260 | 329J4L | SAF2507 | |
| 00Cr25Ni6Mo3CuN | S32550 | |||
| Special Stainless Alloy | ZG40Cr25Ni20 | HK | ||
| ZG45Ni35Cr27N6 | KP | |||
| ZG50N148Cr28W5 | ||||
| ZGN136Cr26Co15W5 | ||||
| ZG10Ni32Cr20Nb | ||||
| ZG45Ni48Cr28W5Co5 | ||||
| Ferritic Stainless | 0Cr13 | 410S | SUS410S | |
| 00Cr17Ti | ||||
| 00Cr18Mo2Ti | ||||
| Austenite Stainless | 0Cr18Ni9Ti | 321 | SUS321 | SAF2337 |
| 00Cr19Ni10 | 304L | SUS304L | ||
| 0Cr17Ni12Mo2 | 316 | SUS316 | SAF2343 | |
| 0Cr17Ni14Mo2 | 316L | SUS312L | ||
| 00Cr19Ni13Mo3 | 317L | SUS317L | ||
| ZG00Cr19Ni10 | CF3 | SCS19A | ||
| ZG00Cr17Ni14Mo2 | CF3M | SCS16A | ||
| 0Cr25Ni20 | 310S | SUS310S | ||
| 00Cr20Ni18Mo6CuN | S31254 | 254SMO | ||
| 00Cr20Ni25Mo4.5Cu | 904L | 2RK65 | ||
| 00Cr25Ni22MoN | S31050 | 2RE69 |
Cast Aluminum Alloy
| USA | UK | France | Germany | ISO | |||
| ASTM | ANSI | SAE | BS | NF | DIN | ||
| Al-Si Alloy | A03560 | 356 | 323 | — | A-S7G | G—AlSi7Mg (3.2371.61) | AlSi7Mg |
| A13560 | A356.0 | ||||||
| A14130 | A13/A413.0 | 305 | LM20 | A-S13 | G—AlSi12 (3.2581.01) | AlSi12 | |
| A03600 | 360 | 309 | LM9 | A-S9G | G—AlSi10Mg (3.2381.01) | AlSi9Mg | |
| A13600 | A360.0 | A-S10G | AlSi10Mg | ||||
| A03550 | 355 | 322 | LM16 | — | G—AlSi5Cu | — | |
| C33550 | C355.0 | ||||||
| A03280 | 328 | 331 | LM-24 | — | G—AlSi8Cu3 (3.2151.01) | — | |
| A03281 | 328.1 | ||||||
| A03190 | 319 | 326 | LM4 | A-S5UZ | G—AlSi6Cu4 (3.2151.01) | — | |
| A03191 | LM21 | A-S903 | |||||
| — | SC122A | LM2 | — | — | — | ||
| A03360 | 336 | — | LM13 | A-S12UN | — | AlSi12Cu | |
| A03361 | 336.1 | ||||||
| — | — | LM1 | — | G—AlSi(Cu) | — | ||
| A13570 | 357 | ||||||
| F357 | |||||||
| A03541 | 354 | — | — | — | — | — | |
| A03540 | |||||||
| Al-Cu Alloy | ＿ | ＿ | ＿ | ＿ | A-U5GT | G-AlCu4TiMg (3.1371.61) | AlCu5MgTi |
| A02950 | 295 | 38 | ＿ | A-U5GT | G-AlCu4Ti (3.1841.61) | AlCu4MgTi | |
| B295.0 | |||||||
| Al-Mg Alloy | A05200 | 520 | 324 | LM10 | ＿ | G-AlMg10 (3.3561.01) | ＿ |
| A05202 | 520.2 | 320 | LM5 | ||||
| A05140 | 514 | ＿ | ＿ | A-G6 | ＿ | AlMg6 | |
| A05141 | 514.1 | A-G3T | AlMg3 | ||||
| Al-Zn Alloy | A07120 | 7122.2 | ＿ | ＿ | A-Z5G | ＿ | AlZn5Mg |
| A07122 | |||||||
A356 is the most popular. A380 aluminum alloy is also widely used for casting general-purpose die castings. It has good mechanical properties and is used in hundreds of applications including air brake castings, gear cases and air-cooled cylinder heads. Aluminum6061, 7075, 5052 are typically used in extrustion and not suitable for diecasting.
Copper Material
| Germany DIN | Europe EN | ISO | USA UNS | China GB | ||
| OF-Cu | 2.004 | Cu-OFE | CW009A | Cu-OF | C10100 | TU1 |
| SE-Cu | 2.007 | Cu-HCP | CW021A | - | C10300 | |
| SE-Cu | 2.007 | Cu-PHC | CW020A | - | C10300 | |
| E-Cu58 | 2.0065 | Cu-ETP | CW004A | Cu-ETP | C11000 | T2 |
| SF-Cu | 2.009 | Cu-DHP | CW024A | Cu-DHP | C12200 | |
| SF-Cu | 2.009 | Cu-DHP | CW024A | Cu-DHP | C12200 | |
| SF-Cu | 2.009 | Cu-DHP | CW024A | Cu-DLP | C12200 | |
| SW-Cu | 2.0076 | Cu-DLP | CW023A | Cu-DLP | C12000 | TP1 |
| CuZn5 | 2.022 | CuZn5 | CE500L | CuZn5 | C21000 | H96 |
| CuZn10 | 2.023 | CuZn10 | CW501L | CuZn10 | C22000 | H90 |
| CuZn15 | 2.024 | CuZn15 | CW502L | CuZn15 | C23000 | H85 |
| CuZn20 | 2.025 | CuZn20 | CW503L | CuZn20 | C24000 | H80 |
| CuZn30 | 2.0265 | CuZn30 | CW505L | CuZn30 | C26000 | H70 |
| CuZn33 | 2.028 | CuZn33 | CW506L | CuZn35 | C26800 | H65 |
| CuZn36 | 2.0335 | CuZn36 | CW507L | CuZn35 | C27000 | H63 |
| CuZn37 | 2.0321 | CuZn37 | CW508L | CuZn37 | C27200 | H60 |
| CuZn36Pb1.5 | 2.0331 | CuZn35Pb1 | CW600N | CuZn35Pb1 | C34000 | |
| CuZn36Pb1.5 | 2.0331 | CuZn35Pb2 | CW601N | CuZn34Pb2 | C34200 | |
| CuZn40 | 2.036 | CuZn40 | CW509N | CuZn40 | C28000 | |
| CuZn38Pb1.5 | 2.0371 | CuZn38Pb2 | CW608N | CuZn37Pb2 | C35000 | |
| CuZn36Pb3 | 2.0375 | CuZn36Pb3 | CW603N | CuZn36Pb3 | C36000 | HPb60-2 |
| CuZn39Pb2 | 2.038 | CuZn39Pb2 | CW612N | CuZn38Pb2 | C37700 | |
| CuZn39Pb3 | 2.0401 | CuZn39Pb3 | CW614N | CuZn39Pb3 | C38500 | |
| CuZn40Pb2 | 2.0402 | CuZn40Pb2 | CW617N | CuZn40Pb2 | C38000 | HPb59-1 |
| CuZn28Sn1 | 2.047 | CuZn28Sn1As | CW706R | CuZn28Sn1 | C68800 | |
| CuZn31Si1 | 2.049 | CuZn31Si1 | CW708R | CuZn31Si1 | C44300 | |
| CuZn20Al2 | 2.046 | CuZn20Al2As | CW702R | CuZn20Al2 | C68700 | |
| CuSn4 | 2.1016 | CuSn4 | CW450K | CuSn4 | C51100 | |
| CuSn5 | 2.1018 | CuSn5 | CW451K | CuSn5 | C51000 | |
| CuSn6 | 2.102 | CuSn6 | CW452K | CuSn6 | C51900 | |
| CuSn8 | 2.103 | CuSn8 | CW453K | CuSn8 | C52100 | |
| CuNi12Zn24 | 2.073 | CuNi12Zn24 | CW403J | CuNi12Zn24 | C75700 | |
| CuNi18Zn27 | 2.0742 | CuNi18Zn27 | CW410J | CuNi18Zn27 | C77000 | |
| CuNi18Zn20 | 2.074 | CuNi18Zn20 | CW409J | CuNi18Zn20 | C76400 | |
| CuNi10Fe1Mn | 2.0872 | CuNi10Fe1Mn | CW352H | CuNi10Fe1Mn | C70600 | |
| CuNi30Mn1Fe | 2.882 | CuNi30Mn1Fe | CW354H | CuNi30Mn1Fe | C71500 | |
Zinc Material for Die Casting (Available in China)
| ZAMAK2 | The strongest and hardest ZAMAK alloy. Generally die cast, it is occasionally employed for gravity casting |
| ZAMAK3 | The most used general purpose zinc die casting alloy, providing an excellent combination of strength, ductility and impact strength. It also provides excellent plating and finishing characteristics. |
| ZAMAK5 | |
| ZAMAK7 | |
| ZA-8 | Die Casting - Hot Chamber, provides improved performance characteristics over the ZAMAK alloys |
| ZA-12 | Die Casting - Cold Chamber, Permanent mold |
| ZA-27 | Die Casting - Cold Chamber |
| ZA-35 | Die Casting - Gravity Casting |
See ASTM B86, B791, B240, B669